Package included:
RC Switch x 1
JST female cable x 1
JST male cable x 1

Features:
This RC switch is ideal for switching lights, smoke system, bomb drops, plane canopies, sound and any other auxiliary electrical items.
It will also be connected to receiver AUX channel or other desire channel. toggle the related switch on the transmitter, this RC switch will close or open.

Specifications:
RX lead length:100mm
Power in/out lead length:100mm (every)
Switching load current (DC):8A (Continuous current)
Input Voltage (DC):3.7-28V

Normal mode
The module can read a pulse width that can range from 400 to 2600us.
If the width of the pulse is more than 1600us, the mosfet switch will close, if lower than 1400us, the mosfet switch will open.

Safe-protection function
This module has a Protected-protection feature that reduces the likelihood of unexpected activation.
In below 2 conditions the Protected-protection mode will active:
1.The pulse is more than 1600us to start with power up, the mosfet switch open. The LED will blink, you must move the input to the off position, then normal more will active ;
2.The signal is bad ceaselessly for 500ms, the mosfet switch open. The LED will blink. When the signal is good, the device will deactivates Protected-protection mode.

LED
Normal mode: the LED will on when input pulse >1600us; the LED will off when input pulse Protected-protection mode: the LED will fast blink

Make sure this fits by entering your model number.
Package include a RC switch and JST female and male cables. This RC switch will also be connected to receiver AUX channel or other desire channel. Toggle the related switch on the transmitter, this RC switch will close or open.
Easily turn on or off lights, smoke system, bomb drops, plane canopies from your remote controller or transmitter
Super simple install, just plugs with the item you want to keep watch over, no setup required. Just make sure in your radio the throw for the channel you want to keep watch over is set to +/- 100%
Suitable for RC cars, trucks, planes, helicopter, quadcopter and drones
Input Voltage (DC):3.7-28V. load current (DC):8A (Continuous current)

The post RC Remote Controlled AUX on/Off Electronic Switch Relay for Car Truck Boat LED Light Drone (8A) first appeared on Floating Wheels.

Plastic Electrical Folding Propeller 10×6 With Hub Nut Cap 35mm 4.0mm Shaft

Description:
Folding Propeller with plastic Spiner
Machined alloy hub.

Package Included:
2 x Blade
1 x Cap
2 x Screw
2 x Screw Nut

Be sure this fits by getting into your type number.
Prop: 10×6, Motor shaft Dia: Φ4.0, HUB: 35MM, Spiner Size: D38×H35mm.
The plastic spiner cap with aluminum alloy hub supply top environment friendly work for your rc plane.
Correct size perfectly compatible together with your rc airplane motor.

The post RC Folding Propeller 10×6 inch w/Spinner Size D38×H35mm, and Motor Shaft Diameter φ4.0 with Nylon Plastic Spinner for RC… first appeared on Floating Wheels.